ะกััะธะปะบะฐ ะดะปั ััะดะฝะพะณะพ ัะปะฐะบะฐ
ะะผะตััะธะผะพััั: 1.9-76.0t/h
Power(kw): 4-55
Application:
Slag, cinder, lignite, coal slime, coal powder, raw coal, coal, fly ash, etc
Features of ore slag dryer
1. The ore slag dryer has a relatively large processing capacity, strong anti-overload ability and low fuel consumption, which can directly reduce the drying cost.
2. To achieve a better drying effect, the slag dryer adopts a downstream drying method. The material and heat source airflow enters the drying equipment from the same side. The outlet temperature of the slag dryer is low and the thermal efficiency is high.
3. The slag drying equipment has realized innovation in the internal structure, strengthened the cleaning and heat conduction of dispersed materials, and completely solved the adhesion phenomenon of the inner wall of the cylinder.
4. The new generation of slag dryers uses a new type of feeding and discharging device, which eliminates the clogging, discontinuity, unevenness and return of the slag drying equipment, and effectively reduces the load of the dust removal equipment.
5. This type of slag drying equipment can meet the requirements of different users for the particle size and moisture content of a variety of slag materials after drying.
Ore slag dryer working principle
Put the dry and wet material on the belt conveyor into the hopper, and the material enters the feeding end through the feeding machine of the hopper. Because the inclination of the feeding pipe is greater than the natural inclination of the material, the material can smoothly enter the dryer. The material enters the lower end with the heating element from the higher end of the dryer cylinder, and then the material and the heating element flow into the cylinder together. Under gravity, the material enters the lower end of the cylinder. During this period, the wet material also receives heat from the heating medium. The wet material slowly loses moisture and is dried. The screw conveyor sends out the dried material.
The river sand dryer is composed of a cylinder, roller ring, gear, discharge part, lifting plate, reducer, motor, feeding chute, belt conveyor, etc.
Specifications of ore slag dryer
| Model (mm) | Speed(r/min) | Slope(%) | Inlet Air Temperature (ยฐC) | Power(kw) | Capacity(t/h) | Weight(t) |
| ฮฆ800ร8000 | 3-8 | 3-5 | โค700 | 4 | 0.8-2 | 3.5 |
| ฮฆ1000ร10000 | 3-8 | 3-5 | โค700 | 5.5 | 1-3 | 5.6 |
| ฮฆ1200ร10000 | 3-8 | 3-5 | โค700 | 7.5 | 2-3.5 | 13.5 |
| ฮฆ1200ร12000 | 3-8 | 3-5 | โค700 | 11 | 2.5-4 | 14.2 |
| ฮฆ1500ร12000 | 2-6 | 3-5 | โค800 | 11 | 4-6 | 18.5 |
| ฮฆ1500ร15000 | 2-6 | 3-5 | โค800 | 18.5 | 5-8 | 21 |
| ฮฆ1800ร18000 | 2-6 | 3-5 | โค800 | 18.5 | 6-12 | 31 |
| ฮฆ2000ร18000 | 1.5-6 | 3-5 | โค800 | 22 | 8-15 | 35 |
| ฮฆ2200ร12000 | 1.5-6 | 3-5 | โค800 | 22 | 13-15 | 31.6 |
| ฮฆ2200ร14000 | 1.5-6 | 3-5 | โค800 | 22 | 14-16 | 33.5 |
| ฮฆ2200ร16000 | 1.5-6 | 3-5 | โค800 | 30 | 14-18 | 36 |
| ฮฆ2400ร18000 | 1.5-6 | 3-5 | โค800 | 45 | 16-22 | 42.8 |
| ฮฆ2400ร20000 | 1.5-6 | 3-5 | โค800 | 45 | 18-25 | 52 |
| ฮฆ3000ร20000 | 1.5-6 | 3-5 | โค800 | 55 | 25-30 | 77.8 |
| ฮฆ3000ร25000 | 1.5-6 | 3-5 | โค800 | 55 | 28-34 | 87.5 |
