Secador de placa de corrente
Poder: 2-4 Kw
Output: 1-25t/h
Application:
Chain Plate Dryer, also called Plate Dryer, is redesigned based on the traditional mesh belt dryer and conveyor dryer by SINOLION MACHINERY, professional briquette machine and briquette dryer manufacturer. Chain plate dryers are widely welcomed by briquette plants after successful designing. We replace the traditional mesh belt with a newly designed steel plate, which is driven by the motor through the chain connected with a plate.
Applicable: coal briquettes, charcoal briquettes, mineral briquettes and other industry briquettes need to dry.
Working principle of chain plate dryer
Final briquettes, from the briquettes press machine with moisture content around 25%-40%, are fed into chain plate dryer evenly from the feeding top assembled at the top of dryer.
The briquettes will follow the chain plate moving until to the end of first layer, following the turning around of chain plate, the briquettes will fall to the center of first layer, moving with the chain plate until to the beginning of first layer and then fall down to the second layer top following the chain plate turning around. The briquettes will move in the same way until the end of the dryer and discharge from the discharge port!
During the moving with chain plate, the hot air pumped from the furnace will be pumped into the dryer through two side of the dryer by the strong centrifugal fan to the bottom of the dryer; the hot air will pass the moving briquettes and taking the moisture out until the briquettes moisture up to the request date.
Usually, the last layer will be assembled on the chain plate without a hole to collect the dust generated during the process and conveyed out.
Chain plate dryer characteristics
1. High drying efficiency
2. Less space request
3. Less final briquette damage rate
4. Running stability and fewer Spare parts
5. Automatic dust device.
Specifications of chain plate dryer
| Model | 1001 | 1503 | 2203 | 2205 | 2208 |
| Single effective working length(m) | 25.5 | 30.5 | 36.5 | 36.5 | 36.5 |
| Floors | 1 | 3 | 3 | 5 | 8 |
| Effective working width(m) | 50 | 105 | 180 | 180 | 180 |
| The average thickness of the material accumulation(mm) | 100-200 | 100-200 | 100-200 | 100-200 | 100-200 |
| Drying capacity(t/h) | 1-2 | 2-3 | 8-10 | 10-15 | 20-25 |
| Moisture content before drying(%) | 8-12 | 8-12 | 8-12 | 8-12 | 8-12 |
| After drying the moisture content(%) | 1.5-3 | 1.5-3 | 1.5-3 | 1.5-3 | 1.5-3 |
| Transfer power(kw) | 2 | 2 | 3×3 | 5.5×5 | 5.5×4 |
| Air temperature requirements(℃) | 180-250 | 180-250 | 180-250 | 180-250 | 180-250 |
| Hot air temperature and content requirements | ≤0.01kg/kg dried air | ||||
