Máquina de corte de revolvimento de solo
AAC can follow raw materials classification, craft characteristics of the quality and equipment to adopt different crafts to produce. Generally speaking, fly ash or sand with water is milled into slime, then powdery lime, cement, vesicant, and foam stabilizer to mixed and poured into an autoclave to steam into the porous and lightweight AAC by high pressure and high temperature.
Ground turnover cutting machine used for AAC plant:
The cutting machine is the main equipment of the AAC production line as well as the core machine of the AAC production line with an annual production capacity of over 50000m3. It’s the necessary equipment to improve yield and quality. JQF Series Cutting Machine we produce can turn the blank twice, and do the six-side cutting. With the high technology, the turnover can be finished only once time, which protects the blanks from damage due to many times lifting. Our products are sold well in our country and gained honour from many customers. After many years of technical reform, now we have developed many models of concrete cutting machines.
Ground turnover cutting machine has the following advantages:
1. Compact structure, easy operation and little maintenance.
2. Cross-cutting and vertical cutting is finished once.
3. Hexahedral cutting of the blank, product precision in accordance with GB/T 11969-1997.
4. All waste materials shall be reclaimed, by which secondary pollution will not result.
5. Blank not conglutinated.
6. Lead screwdriver used in cross-section cut, solving out-of-step fluid drive.
7. Big pulley cart, small pulley cart used to promote and install gears, rack solution of sync problem.
8. with types of equipment to replace steel wire rapidly.
9. No bowtie and crack.
Ground turnover cutting machine main technical parameters:
| Number | size | Rough Before Cutting(mm) | Cutting Cycle | Cutting Ability(m3/yr) | Cutting Precision | Total Power(kW) | Dimension(mm) |
| 1 | 4.2m | 4250*1240*650 | 6-8min/block | Above 100,000 | <=3.1.1mm | 25.5 | 12200*4200*5600 |
| 2 | 4.8m | 4860*1560*650 | 6-8min/block | Above 200,000 | <=3.1.1mm | 30 | 16000*6000*5500 |
| 3 | 6m | 6050*1540*650 | 6-8min/block | Above 200,000 | <=3.1.1mm | 30 | 18500*6000*5800 |
