Bucket elevator
Bucket elevator is suitable for vertical transmission of powder, granular and small block and less abrasive bulk materials, which has a small requirement for the type of materials, characteristics and block degrees, it can raise powder, granular and bulk materials, and abrasive materials such as grain, coal, cement, crushed ore, etc. It can also raise high-temperature products that are below 250°C with a maximum height of 40m.
Max feed size: 25-70mm
Capacity: 5.4–142t/h
Outstanding features of bucket elevator
1. Bucket elevator has less requirement on materials, features and the bulk. It can lift, powder, granular and bulk materials;
2. The max lifting capacity is 4,600m3/h;
3. Bucket elevator adopts inflow feeding, gravity induced discharge, and use large capacity hopper;
4. The traction parts adopt wear-resistant chains and steel wire belts to extend the service life of the traction parts;
4. Bucket elevator runs smoothly, generally, the lifting height is 40m or even higher.
bucket elevator working principle
The materials are fed into the machine from the bottom and discharged from the top.
1. Firstly, the materials are evenly fed into the dustpan on the machine base;
2. Secondly, the materials are elevated into the machine head;
3. Thirdly, the raw materials are dumped into the targeted machine.
Specifications of bucket elevator
| Model | Max Feed Size (mm) | Capacity (Ton/Hour) | Lifting Speed (m/s) | Belt Width (mm) | Lifting Height (m) |
| TD160 | 25 | 5.4-16 | 1.4 | 200 | <40 |
| TD250 | 35 | 12-35 | 1.6 | 300 | <40 |
| TD315 | 45 | 17-40 | 1.6 | 400 | <40 |
| TD400 | 55 | 24-66 | 1.8 | 500 | <40 |
| TD500 | 60 | 38-92 | 1.8 | 600 | <40 |
| TD630 | 70 | 85-142 | 2 | 700 | <40 |
