Máquina de briquetas de polvo de mineral

Ore powder briquette machine working principle

The main motor is transmitted to the reducer through the V-belt, the reducer is transmitted to the driving shaft through the coupling, and then a pair of open gears ensure the synchronization of the two roller shafts (constant speed reverse), in which the piston of the driven roller hydraulic cylinder is supported ( The constant pressure type is supported by the inclined iron), the system pressure is guaranteed by the hydraulic circuit, the hydraulic control valve and the accumulator.

The material enters the hopper of the molding machine from the storage bin through the quantitative equipment and is adjusted by the adjusting gate on the hopper. Make the material evenly enter the middle of the pair of rollers, the unit molding pressure of the material that compresses the rollers with constant speed and reverse rotation is changed from small to large, and the molding pressure reaches the peak at the center of the pair of rollers.

After the material passes the line, the molding pressure is rapid. A Decrease makes the material enter into the ball-off state, and the ball is off smoothly.