Maquina cortadora de aire
An air turnover cutting machine is a kind of cutting machine with a simple structure and is practical, and easy to install and maintain.
Cutting mould (longitudinal cut/cross cut): 5/10mm
Production cycle: 6Min/Mold
Output: 100,000-300,000 m³/year
Performance characteristics of air turnover cutting machine
1. The structure of the model is simple and practical, which is convenient for installation and maintenance.
2. The longitudinal cutting device is fixed, the blank is placed on its side to make the blank width 600mm, the cutting wire is short, not easy to break, drift, cutting accuracy is high, and the time of the cutting trolley is short.
3. The cross-cutting device adopts steel wire for saw-like swing and vertical downward cutting, which enhances the toughness of the steel wire, reduces the working strength of the steel wire, and is not easy to break and drift.
4. After the blank body is erected on its side, it can complete the slot milling when cutting longitudinally, without additional slot processing equipment.
5. This model cuts the blank on six sides, and mould oil and mould deformation does not affect the quality of the product.
6. In addition to the production of blocks, this machine can also produce plates.
7. This machine’s cutting process is divided into different stations. When the longitudinal cutting is stepped, the distance between the upper and lower cutting wires is large, which is convenient for settling the wire gap. The wires are also not easy to break when cutting the plate, which improves the yield.
Specification of air turnover cutting machine
| Number | Size | Rough Before Cutting(mm) | Cutting Cycle | Cutting Ability(m3/yr) | Cutting Precision | Total Power(kw) | Dimension(mm) |
| 1 | 4.2m | 4250*1240*650 | 4-6min/block | Above 150,000 | <=3.1.1mm | 25.5 | 12200*4200*5600 |
| 2 | 4.8m | 4860*1560*650 | 4-6min/block | Above 250,000 | <=3.1.1mm | 30 | 16000*6000*5500 |
| 3 | 6m | 6050*1540*650 | 6-8min/block | Above 300,000 | <=3.1.1mm | 30 | 18500*6000*5800 |
