Séparateur magnétique humide
Maximum Magnetic Induction Intensity: 2000-7000
Dry Ore Quantity(T/h): 1-220
Power(kW): 1.1-11
Wet magnetic separator application
CTB wet semi-countercurrent magnetic separator is suitable for cleaning and cleaning strong magnetic materials with particle sizes below 0.5mm for wet separation of ores, especially for the selection of minerals with particle sizes of 0.15~0mm. Or remove the strong magnetic minerals mixed with non-magnetic minerals. CTB wet semi-countercurrent magnetic separator can obtain high-quality iron concentrate and a good recovery rate,
The low-intensity wet drum magnetic separator is mainly used for iron ore beneficiation, removing the iron tramp as the impurity from the industrial materials by wet processing. It’s also used in heavy media recovery in some mineral processing processes or slag recycling industries.
Magnetic system materials adopt ferrite and NdFeB with high performance, high coercive force and high remanence; the surface of the cylinder is lined with wear-resistant rubber.
Wet magnetic separator features
1. The use of rare earth composite magnetic systems, advanced technology, and reasonable structure. Through the special design, the magnetic field intensity distribution of the selected area and swept selection area is more reasonable, and the sorting effect is more obvious.
2. Tank through special design, not easy to block, running material.
3. The two ends adopt wear-resistant aluminium flange, drum surface lining with wear-resistant material, wear-resistant performance long service life.
4. Cycloidal reducer, small volume, light weight, less power consumption.
5. Simple structure, large handling capacity, simple operation, easy to maintain.
Wet magnetic separator working principle
When the pulp enters the magnetic field area, the strong magnetic minerals are adsorbed on the surface of the cylinder, the weak magnetic and non-magnetic minerals are washed and discharged by the flow. The magnetic minerals adsorbed on the cylinder surface rotate with the cylinder, are brought out of the magnetic field area, washed into the concentrate trough with flushing water, and the separation operation is completed.
Specifications of wet magnetic separator
| Model | Tube Diameter * Cylinder Length (mm) | Sweep Selection Average | Maximum Magnetic Induction Intensity | Dry Ore Quantity (T/h) | Pulp Quantity (M3/h) | Pouvoir (kW) | Cylinder Speed (r/min) | Total Machine Weigh (t/kg) |
| CTB-44 | 400*400 | 1000-4500 | 2000-7000 | 1-2 | 3 | 1.1 | 45 | 350 |
| CTB-46 | 400*600 | 1000-4500 | 2000-7000 | 1-3 | 5 | 1.1 | 45 | 600 |
| CTB-66 | 600*600 | 1000-4500 | 2000-7000 | 5-10 | 16 | 1.1 | 40 | 705 |
| CTB-69 | 600*900 | 1000-4500 | 2000-7000 | 8-15 | 24 | 1.1 | 40 | 830 |
| CTB-612 | 600*1200 | 1000-4500 | 2000-7000 | 10-20 | 1 | 2.2 | 40 | 960 |
| CTB-618 | 600*1800 | 1000-4500 | 2000-7000 | 15-30 | 48 | 2.2 | 40 | 1340 |
| CTB-712 | 750*1200 | 1000-4500 | 2000-7000 | 15-30 | 48 | 3 | 35 | 1500 |
| CTB-718 | 750*1800 | 1000-4500 | 2000-7000 | 20-45 | 72 | 3 | 35 | 2100 |
| CTB-918 | 900*1800 | 1000-4500 | 2000-7000 | 25-55 | 90 | 4 | 28 | 2900 |
| CTB-924 | 900*2400 | 1000-4500 | 2000-7000 | 35-70 | 110 | 4 | 28 | 3500 |
| CTB-1018 | 1050*1800 | 1000-4500 | 2000-7000 | 40-75 | 120 | 5.5 | 22 | 4000 |
| CTB-1021 | 1050*2100 | 1000-4500 | 2000-7000 | 45-88 | 140 | 5.5 | 22 | 4500 |
| CTB-1024 | 1050*2400 | 1000-4500 | 2000-7000 | 52-100 | 160 | 5.5 | 22 | 5000 |
| CTB-1030 | 1050*3000 | 1000-4500 | 2000-7000 | 65-125 | 200 | 7.5 | 22 | 6200 |
| CTB-1218 | 1200*1800 | 1000-4500 | 2000-7000 | 47-90 | 140 | 5.5 | 19 | 5800 |
| CTB-1224 | 1200*2400 | 1000-4500 | 2000-7000 | 82-120 | 192 | 7.5 | 19 | 6200 |
| CTB-1230 | 1200*3000 | 1000-4500 | 2000-7000 | 80-150 | 240 | 7.5 | 19 | 7200 |
| CTB-1530 | 1500*3000 | 1000-4500 | 2000-7000 | 90-170 | 270 | 11 | 14 | 8100 |
| CTB-1540 | 1500*4000 | 1000-4500 | 2000-7000 | 115-220 | 350 | 11 | 14 | 9300 |
